SOUTHWORTH

Stack Box Positioner
Home Up Roll-On Tilter Portable Tilter Universal Tilter Lift and Tilt Side Entry Tilter Stack Box Positioner Dandy Leveler Dandy Lift and Tilt Pneumatic Lift and Tilt

IMPROVE THE EFFICIENCY AND SAFETY OF OPERATORS WORKING WITH TOTES, JUNIOR CONTAINERS, AND STOCK CARTS.

STACK BOX POSITIONER

Dollies used to transport stacks of containers can be rolled on and off the adjustable width forks. They can then be raised or lowered to the best height to allow the operator to load and unload parts with a minimum of lifting, bending, stretching, or reaching. The unit is so compact it requires little more floor space than the containers, and the low 38" mast is well below the line of sight of standing or seated workers.

Capacity is 1,000 lbs. and lift height is adjustable up to 26" by foot switch or pushbutton control.

Specifications

Capacity: 1000 lbs. uniformly distributed load.
Overall Dimensions: 35 3/4"L x 28"W (33" including lags) x 38"H
Vertical Travel: 26 inches
Lowered Height: 2 1/2" (at forks)
Rise Time: 7 seconds
Lowering Time: Adjustable
Forks: 2 1/2"H x 26"L
Fork width: Adjustable from 8 1/2" to 26 3/4" outside to outside
Power Unit: Internal 1 HP, TENV motor
Voltage: 115-1-60
Controls Footswitch or pushbutton up/down
Price: $2,350

 

CALL TOLL FREE (800) 458-6870

[ Go to the MHS Home Page ] [ Discount Catalog ]
contact.gif (2263 bytes) [ Search ] [ Mailing List ]

This page created and maintained by the Internet division of Material Handling Sales, Inc.
Questions and Comments can be emailed to mhsinc@mathand.com