Our 
Newest!

Model Series P85, P184, P185, P186, and P195
DRUM HANDLERS FOR USE WITH HOISTS OR CRANES
FOR POURING DRUM CONTENTS

Model P185R Kontrol-Karrier with Top-Rim-Clamp shown with optional self-stopping hand crank

MODEL P85 Series DRUM-KARRIERS

• Transport loaded drums by monorail, crane, or chain block
• Fast, simple manual dumping and dispensing
• Model P85A for standard 55 gallon steel drums
• Model P85A-M with spark resistant parts
• Tilt-lock holds drum in vertical position while moving drum
• Lock at horizontal for draining through a faucet
• Release the locks for hand controlled tilting to any angle
• Drum-Karriers available for various drum sizes
• Capacity: 
  800 Lb. (363 kg) Full drum
  500 Lb. (227 kg) Half-full drum

• Adjustable to grip steel or fibre drums
• Rubber faced grip pads are tightened by hand-crank to fit drum diameter
• Operator controls drum pouring by pull-chain driven gears similar to those of model 185A shown below
• Capacity: 500 Lb. (227 kg)

MODEL P195 Series KONTROL-KARRIER

• Karrier with motor driven tilt for below-the-hook applications.
• Available models with single phase, three phase AC motors, or air motor
• Capacity:
  1000 Lb. (454 kg) Full drum
  500 Lb. (227 kg) Half-full drum

• Karrier with battery powered tilt for below-the-hook applications
• Decreases effort and increases productivity
• Has push buttons for 180° controlled tilt
• Tilt function is powered by a rechargeable 12V battery. (Battery and charger provided with unit)
• Capacity:
  1,200 Lb. (545 kg) Full 55 gallon steel drums
  600 Lb. (272 kg) Half-full drums
• Drum holder has the same alloy steel cinch chain and ratchet tightener as on Model P185A-HD

MODEL P185 Series KONTROL-KARRIERS

• Pull chain controlled and "hand-geared"
• Cost efficient drum handler
• Saves time and labor costs by using your hoist to allow controlled pouring at heights beyond reach
• Gears permit a 360° turn in either direction

MODEL P185A

• Gear and sprocket drive with 30:1 ratio
• Capacity: 
  800 Lb. (363 kg) Full 55 gallon steel drums
  500 Lb. (227 kg) Half-full drums
• Also available with spark resistant parts as model P185A-M

MODEL P185A-HD
HEAVY-DUTY KONTROL-KARRIERS

• Extra 2:1 heavy-duty sprocket set to give 60:1 ratio
• Higher capacity and finer control
• Capacity: 
  1500 Lb. (682 kg) Full 55 gallon steel drums 
  800 Lb. (364 kg) Half-full drums
• Also available with spark resistant parts as model P185AM-HD

• 60:1 worm gear speed reducer and "extra heavy-duty" rating
• Capacity:
  2,000 Lb. (909 kg) Full 55 gallon steel drums
  1000 Lb. (454 kg) Half-full drums
• Also available with spark resistant parts as model P185AM-GR.

• Handles 55 gallon (210 liter) plastic or steel drums in a size range of 22 to 23-½" diameter by 34-39" tall
• Bracket on the drum holder has an el-shaped foot to support the drum from the bottom and a hold-down bracket to trap it from the top
• Capacity:
  900 Lb. (409 kg) Full drums
  450 Lb. (204 kg) Half-full drums 

MORSE EXTRA QUALITY FEATURES:

• High strength lifting components

• Secure drums by high strength, wear resistant alloy chain

MODEL P185G KONTROL-KARRIER
WITH 3-PIECE SADDLE

• Similar model P185A, but with a different type of holder (three-piece saddle) for the drum
• For use with 55 gallon (210 liter) steel drums only.
• Drum holder in the P185G has hinged metal bands in front of the drum with a clamp closure. This drum holder is suitable for handling the single diameter for which it is designed. It does not accommodate adjustment for a second size.
•  Drum handlers with the three-piece saddle can be made for specific size drums on special order.

• Chain tightening ratchet and spring loaded pawl assembly has oversize, specially contoured teeth and redundant safety features for reliability and ease of use

• New solid steel band drum holder has the Morse name boldly cut through it. This clear marking permanently identifies it as a genuine Morse drum handler.

Options for Morse Kontrol-Karriers
(not shown)

• Self-stopping hand crank and gear covers in place of chain wheel. Order with suffix code -X01.
• Hand crank (simple type, not self-stopping) and gear covers in place of chain wheel. Order suffix code -X02
• Hand wheel and gear covers in place of chain wheel. Order suffix code -X03.
• Crank or hand wheel option for P185A-GR does not include gear cover. The gear mechanism for P185A-GR is fully enclosed worm gear type.
• Self-stopping crank is not available for P185A-GR. The worm gear speed reducer of the P185A-GR tends to hold the tilt angle when rotation is stopped
• Optional counterweight for yoke: This simple to attach accessory counterbalances the weight of the tilt gears enabling the unit to hang more plumb from the center lifting eye. Order by part number according to which Kontrol-Karrier it should fit:
• Part number P471-P Counterweight for P185A or P185G
• Part number P481-P Counterweight for P185A-HD or P185A-HDPS
• Part number P421-P Counterweight for P186