Models P86, P41, P42, P90, P91, and P92
BELOW-HOOK LIFTERS:

DRUM HANDLERS FOR USE WITH HOISTS OR CRANES 
FOR MOVING DRUMS


 

MODEL P86 DRUM LIFTER
  • Transports drums in the upright position
  • Designed for plastic and fibre drums 
    with 22" to 23½" diameters and 23" to 38" high
  • Drum is supported on bar at the bottom
  • Drum is secured in saddle with chain and ratchet
  • Attaches to a monorail, crane, or chain block
  • Capacity: 1,000 Lb. (454 kg)

 


MODEL P41 DRUM LIFTING HOOK
  • Model 41 lifts horizontal 55 gallon (210 liter) steel drums, 34-36" (86-92 cm) long
  • Alloy steel lifting ring, steel rods, malleable iron hooks
  • Capacity: 1,000 Lb. (454 kg)

MODEL P41-M SPARK RESISTANT DRUM LIFTING HOOK
  • Lifts horizontal 55 gallon (210 liter) steel drums
  • Similar to 41 but made of bronze and copper for spark-resistance
  • Capacity 750 Lb. (340 kg)

 


MODEL P42
WITH HORIZONTAL DRUM


MODEL P42
WITH DRUM IN OFF-VERTICAL POSITION

MODEL P42 DRUM LIFTER
  • Heavy duty drum lifter for use on a hoist hook or fork mounted hook.
  • Made with a pair of forged hooks for engaging the rims at opposite ends of the drum.
  • Pair of alloy steel lifting rings provides for two modes of lifting:
    1. Drum horizontal
    2. Drum in off-vertical
  • Enables upending and downending drums.
  • Lower drum until its bottom corner meets the floor, then guide drum to settle upright or allow it to tilt down to horizontal.
  • Alloy chain, alloy links and alloy lifting rings are combined with heavy duty steel rod with welded eyes to provide a heavy duty assembly. The forged steel hooks are shaped to engage drum rims.
  • Capacity: 2,000 Lb. (909 kg)
  • Model 42 is self-colored, without blue paint
  • Model 42-G is same style lifter with hot dip galvanized finish

 

 


Models P90, P91, & P92

MODEL P90 VERTI-KARRIER
  • GRAB, LIFT, MOVE, and PLACE DRUMS ALMOST ANYWHERE
  • Load drums into remote or hard-to-reach areas
    1. Attach the Verti-karrier to your hoist
    2. Move the Karrier to drum and then lift
    3. It grips automatically
    4. Releases the load when the drum is set down. 
    Grip will not disconnect until the drum is fully down.
  • The operator's only duties are to operate the hoist and guide the grab into position. Moving drums to and from difficult locations saves operator and equipment time, and protects against dangerous climbing. The grab mechanism is simple.
  • Capacity: 1,000 Lb. (454 kg)
  • Not for drums without lids or tops in place.
  • Model 90-M sis same karrier with spark resistant parts.

MODEL P90-30 VERTI-KARRIER (not shown)
Similar to model 90, but sized for typical 30 gallon steel drums. Not for drums without lids or tops in place.

MODEL P90-85 VERTI-KARRIER (not shown)
Similar to model 90, but sized for typical 85 gallon steel overpack or salvage drums. Not for drums without lids or tops in place.

 

MODEL P91 LIFTER FOR DRUMS and OVERPACKS
  • For placing 55 gallon (210 liter) steel drums into overpack or salvage drums.
  • Can also lift 85 gallon steel overpack drums.
  • Effective and simple to use with carefully designed ice-tong-like geometry and broad faced, thin profile grippers.
  • Broadness of grippers spreads holding force to minimize pressure on drum.
  • Narrow profile enables it to lower the drum completely into the overpack.
  • Can also be used to lift and move the closed salvage drum.
  • Capacity: 1,000 Lb. (454 kg)
  • Shipping weight 18.5 lb. Class 77.5 by truck, UPS and RPS. Fully assembled in 20" x 9" x 17" carton.
 

MODEL P92 LIFTER FOR PLASTIC, FIBRE and STEEL DRUMS.
Now one lifter can do it all! Also available with spark resistant parts as model P92-M.

Lifts typical rimmed plastic drums in 30 to 55 gallon sizes.

 

 

Lifts 18-1/2" ID, 19" OD fibre drum. Use for drums with suitable rims in diameter range 18" to 26" (46-66cm).

 

 

  • Latest of Morse "Below the Hook" lifters.
  • Has self-adjusting tong-like action
  • Automatically grips various common types of closed steel, fibre or plastic drums.
  • 18" to 26" diameter range includes many lever-lock closure fibre drums, typical steel drums and rimmed plastic drums in 30 to 55 gallon sizes.
  • Also handles 85 gallon steel salvage or overpack drums. (not for plastic overpacks)
  • Can be used to lift drums to or from four-drum pallets or rows of adjacent drums.
  • Capacity: 1,000 Lb. (454 kg)

NOTE:

  • Drum rim must be within 1" from the top of the drum.
  • Weight of drum contents must not exceed the drum manufacturer's packing limit.
  • Drum lid must be properly secured.

Shipping weight 25 lb. Class 77.5 by truck, UPS and RPS. Fully assembled in 20" x 9" x 17" carton.

 

CALL TOLL FREE (800) 458-6870

[ Go to the MHS Home Page ]
contact.gif (2263 bytes) [ Search ] [ Mailing List ]

This page created and maintained by the Internet division of Material Handling Sales, Inc.