• MORSE DRUM-ADAPTERS, P55/30 SERIES ENABLE DRUM HANDLERS TO FIT SMALLER DRUMS

  • FOR USE WITH KARRIER MODELS P185A-HD, P185A-BP, P285A, P285A-HD, P285A-BP AND THE P400 SERIES ONLY.

 

Model P55/30 Series, PE14, and P725G-P
ACCESSORIES TO ADAPT FOR VARIOUS DIAMETERS AND FIBRE DRUMS

  • Morse Drum-Adapters make it possible to handle several different diameter drums with the same Morse "Karrier"
  • Designed to be quickly added to Karrier's drum holder
  • Reduce grip diameter to match drums smaller than standard steel 55 gallon drums
  • Add the "Fibre Drum Strap" Model PE14 for fibre drums or straight walled steel drums

 

Inside diameters listed in chart below intended to correspond to several of the most popular USA-made standard fibre drum sizes. Other sizes can be made on special order. Model P55/P30 series are all steel. Also available with spark resistant parts: for example as model P55/30M-19.

  • P55/30-22
    Sized for drums close to 22" diameter.

  • P55/30-20.5
    Sized for drums close to 20½" diameter.

  • P55/30-19
    For standard steel 30 gallon drums and other drums close to 19" diameter. (not shown)

  • P55/30-17.5
    Sized for drums close to 17½" diameter.

  • P55/30-16
    Sized for drums close to 16" diameter. (not shown)
Morse Identify drum size by any of these measurements:
Adaptor
Model No.1		 Inside
Diameter2		 Outside
Diameter3		 Circumference4
  P55/30-22 21.5 22 67-1/2 to 69-1/8"
  P55/30-20.5 20 20.5 62-7/8 to 64-3/8"
  P55/30-19 18.5 19 58-1/8 to 59-5/8"
  P55/30-17.5 17 17.5 53-1/2 to 54-7/8"
  P55/30-16 15.5 16 48-7/8 to 50-1/4"

1NOTE: Also use PE14 "'Fibre Drum Strap" for fibre drums and staight walled steel drums

2Fibre drums are often described by inside diameter.

3Calculated from measured circumference. (OD = CIRCUM / 3.14)

4Use a tape measure around the girth.
 

PE14 FIBRE DRUM STRAP
  • Replaces cinch-chain of standard saddles to grip fibre and straight walled drums
  • Handle drums with diameters less than standard steel 55 gallon
  • Also available with spark resistant parts as PE14SS which has stainless steel parts instead of ordinary carbon alloy steel

 

 

THREE-PIECE SADDLE - Part Number P725G-P

  • Provides alternate method for securing the drum into the saddle band
  • This is not an adaptor
  • It is a saddle assembly for 55 gallon steel drums, and is a permanent part of the drum handler
  • Model P185A, w/ chain & ratchet, can be field converted to Model P185G by replacing the saddle assembly with the three-piece saddle assembly, p/n P725G-P

CALL TOLL FREE (800) 458-6870

[ Go to the MHS Home Page ]
contact.gif (2263 bytes) [ Search ] [ Mailing List ]

This page created and maintained by the Internet division of Material Handling Sales, Inc.